Reference price :
Contact us
  • Series
    LMS
  • Model
    LMS-W
  • Brand / Made in
    CITEL / FRANCE
  • Smart lightning monitoring system for wind turbines.
  • 1 monitor + 3 sensors for the blades
  • Monitoring, record the data for surge current, time of lightning strike, etc.
  • Transmit the data by means of RS485.
  • IEC 61400-24 and IEC 62561-6 compliant

The LMS-W is a smart lightning monitoring system developed by CITEL for wind turbines.

LMS-W is mainly used for surge current measurement when lightning strikes one of the rotor blades. The lightning surges can be detected by corresponding sensors and then data can be transmitted to a monitoring device to the upper computer through RS485.

The LMS-W provides smart and precise monitoring for necessary and timely maintenance to the rotor blades when unexpected lightning strikes occur. This can help reduce downtimes and provide valuable data on the system.

LMS-W is composed of three sensors and one detector for the blades. LMS-W is installed in the blades and hub, and each blade is typically installed with one sensor to collect lightning information.

 

vị trí lắp đặt cảm biến và bộ xử lý trung tâm của hệ thống giám sát LMS-W

LMS-W - installation location on wind turbine

 

đầu cảm biến của LSM-W gắn trên dây nối đất lưỡi cánh quạt gió

LMS-W sensor mounting on down conductor of Blade

ELECTRICAL PROPERTIES

  • Minimum current sensibility Itc: 10 kA 
  • Max. admissible impulse current Imcw: 200 kA
  • Life time: 10 years
  • Power: 24 Vdc

MECHANICAL PROPERTIES

  • Mounting: On plate
  • Operating temperature: -40°C to + 70°C
  • Protection rating: IP67
  • Dimensions: 66 x 55 x 47 mm
  • Weight: 1.6 kg

NORMS

  • Standards compliance: IEC 61400-24, IEC 62561-6

Other products in the same category

closet

CART

No products in your cart
Báo Giá Sản Phẩm